FR509 Fluidised Reactor
The FR509 is known as a Rowaphos reactor because of its ordinary usage for fluidising Rowaphos yet this top quality reactor may be used for carbon or fluidising lavender as a social network.
The FR509 is a significant fluidised reactor using a spin off bayonet lid to permit easy access for replacement of their press. The water is pushed down a tube and can be returned back up via a diffuser plate. Sponges are fitted both sides of this media section to keep the finer particles.
The lid is fitted with a tap to adjust the stream and 2 hosetails connected to marriages for easy elimination or to permit hard piping for use
Specifications
Capacity:
- Acceptable for up to 1lt of Rowaphos or 1.2 lts of overall media.
Flow rate:
- Up to 500lt/hr (pump not provided )
- Up to 130 USG/hr (pump not provided )
Dimensions:
- 180mm x 140mm x 500mm top (including fixtures )
- 7.1″ x 5.5″ x 20″ high (including fixtures )
Info
Single Sponge
Simply provide one sponge is currently supplied with all the FR reactors for technical reasons.
The base diffuser plate is enough to hold the press off the underside and some other fine particles have been pushed from the lower room once the water begins to leak.
should you’ve got a bottom nozzle then the water always passing through the reactor brings with it detritus which gradually blocks the sponge. In extreme situations the sponge is able to begin to move the room with the power of water under it.
A high sponge must prevent websites from being pushed from the reactor and to the tank. This sponge will even accumulate the exact same detritus however the difference is that the very best sponge is simple to wash and wash without draining the reactor.
